If ordered before 3pm Mon - Fri & Local Pickup in Bury
Subject to T&C's
All major credit/debit cards accepted & Paypal Credit
Our range of wire rope pulleys is designed for lifting, hauling, and load redirection where steel wire rope is used instead of fibre rope. A wire rope pulley is built with reinforced sheaves and robust construction to handle higher loads and resist wear caused by repeated contact with steel cable.
We supply pulleys for wire rope across a variety of sizes and configurations to suit different cable diameters and working loads. These pulleys are commonly used in construction, industrial handling, lifting systems, and winching setups where durability and reliability are essential. Designed to work smoothly under load, each wire rope pulley helps guide cable safely while reducing friction and wear within the system.
For alternative options, you may also want to explore our construction pulleys for site lifting applications or winches to complete a compatible pulling or lifting setup.
If you are looking for a special pulley / sheave we offer a bespoke service to have them manufactured, please download our pulley form as we will require specific details. Please send completed form to sales@winchshop.co.uk
Pulley Type 1A (PT1A) - Cast Iron Pulley with Bronze Bush for Wire or Fibre Rope Ref: 157-1 Cast Iron Pulleys with bronze bush for use on their ow...
View full detailsPolymide Pulley with Bearing & Galvanised Bracket ETT-116P : 60-150kg WEBI Polyamide pulley with bearing and galvanised bracket type ETT-116P ...
View full detailsWEBI Pulley Type ETT-156P - Polymide (Nylon) Pulley with Galvanised Bracket (ETTER) - Ref: 155-11 WEBI Polyamide (Nylon) pulley with plain bearing...
View full detailsWEBI Pulley Type ETT-160 - Galvanised cast iron pulley with pressed steel bracket (ETTER) Ref: 155-4 WEBI Galvanised cast iron pulley with bearing...
View full detailsGalvanised Cast Iron Side Mounted Pulley Type ETT-170 : 100kg to 500kg WEBI Galvanised cast iron pulley with bearing and pressed steel bracket Com...
View full detailsGalvanised Cast Iron Single Pulley Type ETT-74 : 100-1000kg A range of galvanised cast iron single pulleys / sheaves ETT-74 Complete with bearing ...
View full detailsGalvanised Cast Iron Double Groove Pulley Type ETT-74D : 300-500kg WEBI Pulley / Sheave with double groove complete with bearing and fixing bolt M...
View full detailsWEBI Pulley, Type ETT-104P- Polymide (Black) Pulley with ball bearing (ETTER) Ref: WEBI, High-resistance Polyamide (Ultramide) black pulley with ...
View full detailsWEBI Pulley, Type ETT-190P- Polymide (PA 6 white) Pulley (ETTER) Ref: 155-9 WEBI, Polyamide (PA 6 white)/ Nylon) pulley - Type ETT-190P The 190P ...
View full detailsCable Pulleys with Bracket Type KB 7 Sizes with a capacity ranging from 150kg up to 7500kg The Gebuwin pedestals are solidly manufactured and are...
View full detailsPulley KB 150-7500 kg *****(Pulley only no bracket)****** The Gebuwin pulley are solidly manufactured and are specially developed for hand winch a...
View full detailsSteel or Galvanised Cast Iron Pulley with Rotating Hook Type ETT-198 : 15kg to 70kg Steel or galvanised cast iron single pulley / sheave with rota...
View full detailsPolymide Pulley with Rotating Steel Hook Type ETT-198P : 15-70kg Polymide single pulley / sheave with rotating steel hook Fitted with Plain bearin...
View full detailsWEBI Pulley Type ETT-202 - Construction Site Pulley with Rotating Steel Hook for Scaffolding (ETTER) WEBI steel pulley / sheave with rotating hoo...
View full detailsReturn Pulley with Rotating Steel Hook for Wire Cables Type : ETT-205: 400kg Steel return pulley / sheave with rotating hook for use in winching ...
View full detailsGREEN PAINTED GIN PULLEY LIFITNG WHEEL BLOCK Gin Wheel Pulley Blocks are designed for use with three-strand Manila or Synthetic ropes, and are typi...
View full details1000KG SWL PULLEY & BRACKET 130mm ø - Rope ø 8-10mm - Sheave Zinc Plated - Bracket Steel Powder Coated Downloads: Drawing A 1000 kg rope p...
View full detailsGalvanised Forestry Yarding Pulley Block Galvanised Pulley Block for Forestry work is highly durable and also and ideal pulley block for off-road 4...
View full detailsWarrior 2t Pulley Block Hook Type For use with cable ' (Equal to or less than) 6mm Diameter.Suitable For 2000-3500lbs pulling capacity 12 or 24v Ni...
View full detailsWarrior 4t Swing Away Pulley Block For use with cable ' (Equal to or less than) 10mm Diameter.Suitable for 4500-9500lbs Spartan & Samurai This...
View full detailsWarrior PBK150 8.0t Capacity Swing Away Pulley Block For use with both steel and synthetic cable ' (Equal to or less than) 14mm Diameter.Suitable ...
View full detailsWarrior Pulley Block - 12000Lbs Swing Away with Grease Nipple. For use with cable ' (Equal to or less than) 12mm Diameter.Suitable For 4500-17500lb...
View full detailsWarrior Pulley Block - 40,000lb / 18 tonne Swing Away pulley Block. Suitable for winches up to 20,000lb For use with cable ' (Equal to or less tha...
View full detailsarchived due to low qty of sales Warrior Pulley Block - 4T Wire Rope Ref 161-26-16 4.5 inch x 4T Pulley Block for wire ropes 10-12mm. Suitable for...
View full detailsSingle Swing Side Pulley Sheave 100mm This stainless steel swing side snatch block features a lightweight 100 mm diameter deep groove aluminum shea...
View full detailsDouble Swing Side Pulley Sheave 100mm This stainless steel swing side snatch block features two lightweight 100 mm diameter deep groove aluminium ...
View full detailsOpen Face Corner Block Sheave 100mm - Max Rope Diameter 12mm The open-faced pulley is designed for pulling trees perpendicularly to the trail when ...
View full detailsGT Viper Wire Rope Snatch Block Hook Head Carbon steel, light and robust design. Matt black finish. Minimum breaking load is 4 times the W....
View full detailsGT Viper Wire Rope Snatch Block Shackle Head - VSBS Carbon steel, light and robust design. Matt black finish. Minimum breaking load is 4 ti...
View full detailsSteel Pulley with Loose Cone Ball Bearings (Model No. 1209) Pulley with hardened finish, supplied with cone ball bearings. Range of pulley capacity...
View full detailsRope and Gate Sheaves made of Cast Iron (Mode No. 30) With round, turned groove and drilled shaft hole. Range of pulley capacity from 125kg to 350...
View full detailsNo. 169K Wire Rope Sheaves made of Cast Iron Turned groove, with sealed ball bearings. Range of pulley capacity from 250kg to 3200kg. Range of pull...
View full detailsWire Rope Sheaves made of Cast Iron with Plain Bore (No. 169) Turned groove, compatible with fixed roller No. 186 and wire rope guide pulleys No. ...
View full detailsNo. 37 Wire Rope Sheaves Made of Steel with Plain Bearing - Type "ST/R" No 37 pulley is made of polyamide or steel, compatible with wire rope block...
View full detailsCompatibility depends on the pulley sheave size and groove profile. Each wire rope pulley listing includes recommended wire rope diameters to ensure safe and efficient operation.
Yes. Wire rope pulleys are commonly used to change pulling direction under load, allowing safer and more controlled lifting or pulling within winching and hoisting systems.
{"one"=>"Select 2 or 3 items to compare", "other"=>"{{ count }} of 3 items selected"}
