Skip to content

GEBUWIN | WW Type 250kg - 1500kg GR/D Worm gear hand winch (WG Type) Ref: 156-1

£248.87 GBP
SKU 156-1-1

 Worm gear hand winch 250 - 1500 kg Ref: 156-1

The Gebuwin worm gear hand winch has a transmission that consists of a worm shaft and wheel. Due to the fact that this transmission causes friction loss it also provides 50% of the braking system. The load pressure brake provides the other 50%. The combination of the braking system and robust design results in a very safe hoisting and pulling winch.

  • Robust construction
  • Primarily used for hoisting, also possible for pulling loads
  • The braking mechanism consists of 50% by the friction in the worm gear transmission and 50% by a load pressure brake
  • Static safety minimum factor 4
  • Adjustable crank and recoil free
  • All rotating parts run in maintenance free bearings
  • The numbers in the product name correspond with the hoisting capacities on the first cable layer. Pulling capacity is approx. 2.5 times the hoisting capacity
  • Cable outlet possible upward, downward and at rear.
  • Standard paint finish in grey (RAL 7035) and black (RAL 9005) according to DIN 12944, C1M
  • WW1000 and WW1500 are suitable for winch power tool AM5000


  1. GD = Grooved cable drum
  2. EV = Zinc plated finish with a minimum of 6 micron
  3. EX = ATEX certified, for zones 2 and 22
  4. XD = Multiple (X) cable compartments possible
  5. 2D = Twin Drum LINK


Product Sheet WW250 - WW1000

    Related Products

    • Pulley options: LINK
    • Wire rope: LINK
    • Wire rope accessories: LINK

    Technical Area

    Operating Instruction's

    Data Sheet