GEBUWIN - WW TYPE GR/D/EX SINGLE DRUM ATEX WORMGEAR WINCH (WG)

Regular price £364.04 GBP

Operating Instruction's

WW250 -WW1500  GEBUWIN - WW TYPE EV/D ZINC PLATED SINGLE DRUM WORMGEAR WINCH   

WW2000-WW7500 

 

Data Sheets:

WW250 -WW1500  GEBUWIN - WW TYPE EV/D ZINC PLATED SINGLE DRUM WORMGEAR WINCH   

WW2000-WW5000 GEBUWIN - WW TYPE EV/D ZINC PLATED SINGLE DRUM WORMGEAR WINCH

Type coding:
WW = worm gear winches

Version coding:
D = cable drum for 1 cable
2D = cable drum for 2 or more cables
GD = grooved cable drum
GR = grey (RAL 7035) / black (RAL 9005) painted according to DIN 12944-C1
EV = electrolyte zinc plated, min. 6 microns
EX = ATEX 114 certified for zones 2 and 22

The Gebuwin range of hand driven worm gear winches are known for their robust construction. The hoisting capacities are calculated according to the first cable layer on the cable drum. All of the worm gear winches are equipped with a load pressure brake. This brake holds the load at any required height during hoisting and lowering. The worm gear winches are more safe than the spur gear winches, due to the fact that 50% of the braking is done by the friction loss in the transmission. Subsequently, the load on the pressure brake is greatly reduced. Due to the higher friction loss in the transmission, the worm gear winches have a lower performance efficiency than the spur gear winches. The winches have a static safety factor of  minimum 4. The cranks can be adjusted in length and are recoil-free. All rotating parts run in maintenance free bearings. From the 2000 kg capacity winch and up, the winches are fitted with a second drive shaft, which makes it possible to work with two speeds. Most parts are made from steel and have been either painted or zinc plated. The winch with 7500 kg capacity has the worm-worm gear transmission completely protected by a sealed cover.

WW Single Drum Worm Gear (WG) Winch (Type GR/D/EX)
ATEX certified II 3 GD t4, suitable for zone 2 and 22
Lifting capacity from 250 kg to 5000 kg
Static safety factor of 4
For wall mounting, cable outlet possible on top or rear
Square worm gear operated winch with machine cut worm wheel and shaft mounted on maintenance free bearings
Adjustable crank with ergonomic grip
One Speed operation on WW250, WW500, WW1000 & WW1500 Winches
Two speed operation on 2, 3 and 5 tonne models by displacement of the crank
Load Pressure brake with quiet double ratchet system
Fabricated steel frame suitable for wall mounting
Plated Finish as standard
In compliance with EN13157, Duty class to DIN 15020

**As Standard supplied without Wire Rope - Prices available on request**

QUESTIONS & ANSWERS

Have a Question?

Be the first to ask a question about this.

Ask a Question

Shipping Cost

Shipping to

Shipping Rates

    Cart Total

    Subtotal £0.00 GBP
    Discount
    Shipping
    Total