Manual Lifting - Chain Blocks & Lever Hoists

Economical, heavy duty, high quality Chain Block used by many industrial and rental clients


* Compact & Lightweight:
* Low Headroom: 230 mm
* Weight of the device (with 3 m lift): 3.5 kg
* Additional weight per metre of lift > 3 m: 0.54 kg
* Force on the operating chain at full load: 11.4 daN/kg
* Galvanised lifting and operating chain
* Lifting chain grade 80 4 X 12 mm
* Operating chain 2.4 X 14 mm
* 360° pivoting hooks with removable safety catches marked with the WLL of the hoist
* We can make any HOL please call with specifications

Economical, heavy duty, high quality Chain Block used by many industrial and rental clients

S.W.L 500 kg

Features

* Enclosed handy design - easy and safe operation
* Swivelling load suspension hooks with safety catch
* Lightweight with short headroom
* Grade 80 load chain and hand chain both plated as standard
* Full spares availability
* Chain bags available on request
* Tested and certified
* We can make any HOL please call with specifications

Economical, heavy duty, high quality hoists used by many industrial and rental clients.

Capacity 750 to 6000kg

* Light weight and low overall height
* For lifting, pulling and lashing loads
* Lifting and lowering by forward and reverse motion of the lever.
* Chain free reeling by turning the hand wheel or by pulling the non loaded chain.
* Load pressure brake holds the load in every position
* Upper and lower swivel safety hooks
* Grade 80 plated load chain
* Full spares availability
* Tested and certified
* 1.5m & 3m standard lift height, other lift heights available on request

Capacity 1-5 tonnes

* Designed to locate on the flanges of beams via a screw arrangement.
* Acts as a semi permanent lifting point, blue finish.
* Suitable for hanging chain hoists or other lifting devices.
* With shackle suspension as standard.
* Available in t he following Capacity and beam sizes.

The shackle clamp is a means of suspending lifting tackle from beams without drilling the supporting member.

* Ideal to hang hoists, chain blocks, fall/load arresters.
* Each clamp is suitable for one particular width of flange - When you order please advise the beam width and flange thickness.
* The Shackle Clamp can be fixed to an inclined beam - please specify the angle of load when ordering.
* The SC can, however, be moved from one beam to another of the same width and thickness. It can be fixed to girders, tee sections, pairs of angles or channels back - to - back.